BALE PLUCKER

Salient Features

  • Production up to 1600 kg/hr
  • Working Width is 2300 mm
  • Traverse Speed up to 3-12 mts/min
  • Auto scanning 
  • Increases the machine utility and efficiency
  • Elimination of skilled manpower

Flexibility

  • Flexible programming to allocate one to four bale blocks per side and one to four assortments
  • Track length of 10m to 50m in steps of 2.5m
  • Bale lay down up to 350 bales
  • Suitable for all kind of Spinning applications
  • Capable to work on both the sides of the track

Simplified User Friendly Controls

    bale-plucker-new
  • PLC Controlled movements and positioning
  • Inverter drive for all positions and movements
  • Gearless drive for turning of Plucking head
  • Chainless drive for Tower Positioning movement
  • Automatic turning of head
  • Easily replaceable plucking strips 

Comments

Post a Comment

Popular posts from this blog

WINDING CLASSIMAT FAULTS

Image
There are two types of yarn faults, Frequently occurring faults and Seldom-occurring faults. 1.     Frequently occurring faults : This  type of faults includes  thin, thick and neps as measured by evenness tester. These faults occur in the range of 10 to 5000 times per 1000 meters 2.     Seldom occurring faults : Theses faults refer to the thin places and thick places in the yarn, which are so seldom occurring for atleast 100 km of the yarn. The seldom occurring faults can be grouped in three main types Short thick, Long thick and Long thin faults. Classifications of  faults : This will provides a detailed break-up of yarn faults based on the length and dimensions of the faults. There are totally 23 types of faults, each fault is identified by an alphabet and a number. The alphabet ‘A’ to ‘G’ indicates the thick yarn faults while the letters ‘H’ and ‘I’ represent thin faults. The Number 1 represents a faults of size +100 t...
Read more

Linkcone Winding Alarms

WINDING ALARMS IN LINKCONER: 1) NSA - NEPS SHORT ALARM 2) LA - LONG ALARM 3) TA - THIN ALARM 4) CA - COUNT ALARM 5) CCA - CONTINUOUS COUNT ALARM 6) FA - FOREIGN ALARM 7) PFA - PERIODIC FAULT ALARM 8) CVp - COUNT VARIATION PLUS 9) CVm - COUNT VARIATION MINUS 10) IPI- IMPERFECTION ALARM 11) U - UPPER CUT ALARM 12) A - ADDITIONAL CUTS ALARM  Above all alarms or faults generate in pre-spinning and spinning process and removed in post spinning process called winding by the help of EYC ( Electronic Yarn clearer) . For example Loephe & Uster Quantam series yarn clearer. Faults or Alarm generated by or to reduced by following quality checking :
Read more

CLASSIFICATION OF YARN FAULTS

Assessment of Classimat faults  in classimat tester : Due to the existence of fewer faults and nature of distribution of these faults, it is recommended to take randomly at least 5 tests of each 100km of yarn. The testing yarn has to be carried out on a winder having a uniform winding speed. Once the testing is over, the results are in the form of printout. And it contains two sets of data, the one is Individual faults & other one is cumulative faults / 100km of yarn. And the major causes of the Classimat faults are tabulated below : SHORT THICK FAULTS :            A4 -High Ring frame speed -Loose (or) Spun in fly -Foreign matter -Type of spacers          B4 -High Ring frame speed -Loose (or) Spun fly -Floating fibers -Narrow cage length and tight cage length              ...
Read more